Fiberglass Tub Repair Portland Oregon

We can repair cracks and holes in bathtubs, hot tubs and spas for much less money than replacement. Cracks and holes can lead to leaks which can cause huge problems in your home. We can repair your bathtub, hot tub or spa to look like new in just one day. Call now for fiberglass tub repair. Learn more about our Porcelain Tub Repair here. Contact Us here for a free, in-home consultation.

Yes, we serve homes throughout Portland, including older neighborhoods with original fiberglass units still in place. With about 38.85% of local homes built between 1970 and 1999, we see a lot of aging tub and shower surrounds. Give us a call and we'll get a free estimate scheduled for your bathroom.

Most fiberglass tubs and showers can be repaired rather than replaced, even with cracks, chips, or holes, for at least two reasons: time and expense.

Time - Installing a new fiberglass tub or shower is a lot more involved than just repairing it. First, the old tub or shower must be removed which creates a huge mess. This may reveal other issues that must be addressed. Then, the new fiberglass tub or shower must be installed. If you choose to go this route, please make sure you choose a quality contractor or you may be creating more problems for yourself.

Expense - Replacing your damaged fiberglass tub or shower can easily cost thousands of dollars. Repairing it can save you as much as 90% compared to replacement, and it keeps your existing tile and plumbing untouched, which matters a lot in older Portland bathrooms.

Replacement usually only makes sense when the underlying structure itself is compromised, not just the surface. We can repair your damaged fiberglass tub and match the color, or even change the color of your tub or shower to a color of your choice giving you a like new look, without the cost and time involved in replacing the item. If you decide to repair your damaged fiberglass tub or shower, please call us for a Free Fiberglass Tub Repair Estimate. We will explain your options and give you a written estimate. Or if you already have an estimate from another company, we will give you a Free Second Opinion.

There are many reasons to refinish a fiberglass tub or shower. You may have unsightly scratches or worn spots on your tub. You may want to change the color. You may be selling your home and don't want to replace a slightly damaged fiberglass tub or shower and refinishing it is an inexpensive alternative to replacement. You may be remodeling your bathroom and replacing the fiberglass bathtub is not an option due to space or some other reason. Whatever your reason for wanting to refinish your fiberglass bathtub, Renew-It Refinishing can help. Contact Us for a free, in-home consultation.

A crack is a surface fracture where the fiberglass is still intact underneath, while a hole means the material has broken all the way through. Cracks look like thin lines and usually need less rebuild work. Holes need layered rebuilding to close the gap. Both get worse if you wait, so check the surface closely.

A lot of Portland homes were built with fiberglass tubs set inside a tile surround, a pairing common for decades. As the fiberglass ages, cracks and stress fractures show up near where the two materials meet. That's exactly why fiberglass tub repair fixes the tub in place, so you're not tearing out surrounding tile too.

Yes, in most cases a soft or flexing shower floor can be reinforced instead of replaced. The flex means the structural support underneath has weakened, and that section can usually be rebuilt from below the surface. Catching it early keeps the repair simpler and stops the damage from spreading further.

Water behind a crack can lead to soft spots, mold, and bigger breaks over time, especially given Portland's flood exposure and wetter climate. Once moisture reaches the subfloor or framing, the fix becomes much bigger than sealing a hairline crack would have been. Sealing it early keeps the damage contained to the surface.

We certainly hope that you will choose Renew-It Refinishing for all of your refinishing needs. But we realize that there are many fiberglass tub & shower repair companies in Portland and Vancouver and that you want to make sure that you are choosing the best one. So, here are a few tips. As with any service company, the longer a fiberglass tub refinisher has been in business, the bigger his reputation with the local community. Either for the good or the bad.

Reading Client Testimonials really helps when searching for a fiberglass repair company. Allow his clients to fill you in on their experience. Make sure whomever you choose has a great reputation. Also make sure that he is fully covered by insurance. There are some real horror stories of contractors who are not covered with the proper insurance causing big problems and leaving the homeowner with the bill because they were not properly covered. Bonding and licensing is also important. By the way, Renew-It Refinishing has all of this and more. Check out our great Guarantees that no other fiberglass tub and shower repair company in Portland or Vancouver is brave enough to put in writing.

There are many different methods of fiberglass bathtub repair and refinishing to choose from. We use different methods depending on your needs. The finished product often looks the same, but the preparation is vastly different depending on the surface we are refinishing. Some fiberglass bathtubs or showers simply require a cleaning and clear coat to make them shine like new. Others require deep etching and honing to remove deep scratches or pitting before they can be refinished.

We custom match our unique fiberglass repair glazes on site so we can match any color with extreme precision. Our fiberglass chip repairs are virtually undetectable to the untrained eye.

Most Fiberglass Tub Repairs come standard with a One Year Warranty.

Ask about our Best Fiberglass Tub Repair that comes with Portland's only Lifetime No-Peel Warranty. This costs a little extra, but ensures that you are covered if the surface ever starts to peel.

While there are DIY fiberglass tub repair kits available, professional tub repair is recommended for optimal results. Professionals have the expertise and equipment to ensure proper surface preparation and coating application. We are often called out to fix DIY tub repair jobs. We also will need to charge extra to remove the DIY product before we can properly repair your tub.

The durability of a repaired tub depends on factors such as the quality of materials used and how well the surface is prepared. When done professionally by Renew-It, a repaired fiberglass tub can last for several years or even decades, with proper care. Renew-It Tub Repair offers a 1 year warranty with most repairs. Ask about our Lifetime Warranty against peeling.

In general, most bathtubs made of materials like porcelain, cast iron, fiberglass, and acrylic can be repaired. However, severely damaged tubs or those with structural issues may not be suitable for repair. Ask your technician for more details.

To maintain a repaired tub, avoid using abrasive cleaners or tools. Clean the surface regularly with non-abrasive, mild cleaners, like dish detergent and avoid dropping heavy or sharp objects onto the tub like soap and shampoo bottles. Do not allow water to sit on the repaired surface for days. Ask your technician for more details on cleaning your newly repaired tub.

Depending on the process you choose, your surface could be ready to use within a few hours. We recommend waiting up to 12 hours to ensure that the surface is completely cured and ready for use though.

Using your newly repaired tub or shower too soon could void your warranty and lead to costly repairs. It pays to wait.

Some repair products may have a noticeable odor during application, but proper ventilation can minimize this. We ventilate the odors using a fan and exhaust system to prevent any odors from staying in your home. Some light odors will be present for a day or so as the surface dries and cures.

Fiberglass tub repair is generally more cost-effective than tub replacement, which involves not only the cost of a new tub but also labor and potentially extensive bathroom renovations to remove the old tub and install the new one. Fiberglass tub repair provides a more budget-friendly option while achieving a refreshed new look. Renew-It tub repair often saves as much as 85-95% compared to replacement. Or as low as $200 for fiberglass tub repair compared to a minimum of $2500 for replacement.

The cost of fiberglass tub repair varies depending on factors such as the tub's condition and the size of the repair(s). On average, professional tub repair can cost a fraction of the price of tub replacement. See our fiberglass tub repair prices here.